Materials › PLA

Ratings are relative, 1-5, for a typical filament of this type. Start from your filament maker's recommended settings.

Commonly printed in PLA-CF

• Best pick

  PLA-CF

  Jigs, fixtures, and stiff mounts

  Parts that must hold dimension and not flex under light load.

• Best pick

  PETG-CF

  Drone or RC vehicle frame

  Crashes, vibration, and stiffness requirements.

Other PLA types

• 

  PLA

  Standard PLA. Cheap, easy, and the right answer for most decorative and low-stress prints.

  • Display / decorative
  • Quick prototypes

  Nozzle 200-220 °CBed 55-60 °C

  Strength

  3 out of 53/5

  Heat

  1 out of 51/5

  Ease

  5 out of 55/5

• PLA+

  PLA with toughening additives. Less brittle and a bit stronger, still easy to print.

  • Functional parts
  • Quick prototypes

  Nozzle 205-225 °CBed 55-65 °C

  Strength

  4 out of 54/5

  Heat

  1 out of 51/5

  Ease

  4 out of 54/5

• Rapid PLA

  PLA tuned to melt and flow quickly so high-speed printers can run fast without under-extruding.

  • Fast / bulk printing
  • Quick prototypes

  Nozzle 210-230 °CBed 55-65 °C

  Strength

  3 out of 53/5

  Heat

  1 out of 51/5

  Ease

  4 out of 54/5

• Rapid PLA+

  The speed of Rapid PLA with the toughening of PLA+. A strong choice for fast functional prints.

  • Fast / bulk printing
  • Functional parts

  Nozzle 215-235 °CBed 55-65 °C

  Strength

  4 out of 54/5

  Heat

  1 out of 51/5

  Ease

  4 out of 54/5

• Matte PLA

  PLA with a non-glossy, velvety finish that hides layer lines and fingerprints.

  • Display / decorative
  • Cosplay & props

  Nozzle 200-225 °CBed 55-65 °C

  Strength

  2 out of 52/5

  Heat

  1 out of 51/5

  Ease

  4 out of 54/5

• Silk PLA

  Shiny, pearlescent PLA with a metallic or satin sheen. Prints beautifully but is weaker than normal PLA.

  • Display / decorative
  • Cosplay & props

  Nozzle 215-230 °CBed 55-65 °C

  Strength

  2 out of 52/5

  Heat

  1 out of 51/5

  Ease

  3 out of 53/5

• Sparkle / Galaxy PLA

  PLA with fine glitter particles that catch the light. Easy to print and fun to look at.

  • Display / decorative
  • Cosplay & props

  Nozzle 200-225 °CBed 55-65 °C

  Strength

  3 out of 53/5

  Heat

  1 out of 51/5

  Ease

  4 out of 54/5

• Marble / Stone PLA

  PLA with a speckled, stone-like look. Easy to print and good at hiding layer lines.

  • Display / decorative
  • Cosplay & props

  Nozzle 200-225 °CBed 55-65 °C

  Strength

  3 out of 53/5

  Heat

  1 out of 51/5

  Ease

  4 out of 54/5

• 

  Wood PLA

  PLA blended with wood fibers for a warm, sandable, stainable look. Fussy to print.

  • Display / decorative
  • Cosplay & props

  Nozzle 190-215 °CBed 50-60 °C

  Strength

  2 out of 52/5

  Heat

  1 out of 51/5

  Ease

  2 out of 52/5

• Glow-in-the-dark PLA

  ! Home, with precautions

  PLA with glow pigment that charges in light and glows for hours. Great for fun, poor for strength.

  • Display / decorative

  Nozzle 200-220 °CBed 55-60 °C

  Strength

  2 out of 52/5

  Heat

  1 out of 51/5

  Ease

  3 out of 53/5

Suggest an edit to this page