Price tier $$
The speed of Rapid PLA with the toughening of PLA+. A strong choice for fast functional prints.
Also called: rapid pla plus, high speed pla+, hs pla+
Ratings are relative, 1-5, for a typical filament of this type. Start from your filament maker's recommended settings.
Best pick
Rapid PLA+Dozens of parts, and print time is the main cost.
Best pick
Rapid PLAYou just need to check dimensions, fast.
Standard PLA. Cheap, easy, and the right answer for most decorative and low-stress prints.
Nozzle 200-220 °CBed 55-60 °C
PLA with toughening additives. Less brittle and a bit stronger, still easy to print.
Nozzle 205-225 °CBed 55-65 °C
PLA tuned to melt and flow quickly so high-speed printers can run fast without under-extruding.
Nozzle 210-230 °CBed 55-65 °C
PLA with a non-glossy, velvety finish that hides layer lines and fingerprints.
Nozzle 200-225 °CBed 55-65 °C
Shiny, pearlescent PLA with a metallic or satin sheen. Prints beautifully but is weaker than normal PLA.
Nozzle 215-230 °CBed 55-65 °C
PLA with fine glitter particles that catch the light. Easy to print and fun to look at.
Nozzle 200-225 °CBed 55-65 °C
PLA with a speckled, stone-like look. Easy to print and good at hiding layer lines.
Nozzle 200-225 °CBed 55-65 °C
PLA blended with wood fibers for a warm, sandable, stainable look. Fussy to print.
Nozzle 190-215 °CBed 50-60 °C
Home, with precautions
PLA with glow pigment that charges in light and glows for hours. Great for fun, poor for strength.
Nozzle 200-220 °CBed 55-60 °C
Home, with precautions
PLA filled with chopped carbon fiber. Very stiff, matte, and low-warp, but brittle and hard on nozzles.
Nozzle 210-240 °CBed 50-65 °C
