Standard PLA. Cheap, easy, and the right answer for most decorative and low-stress prints.
Nozzle 200-220 °CBed 55-60 °C
Materials › All variants
All variants
Every variant across every material. Search, filter, or start with the material.
Results
PLA with toughening additives. Less brittle and a bit stronger, still easy to print.
Nozzle 205-225 °CBed 55-65 °C
PLA tuned to melt and flow quickly so high-speed printers can run fast without under-extruding.
Nozzle 210-230 °CBed 55-65 °C
The speed of Rapid PLA with the toughening of PLA+. A strong choice for fast functional prints.
Nozzle 215-235 °CBed 55-65 °C
PLA with a non-glossy, velvety finish that hides layer lines and fingerprints.
Nozzle 200-225 °CBed 55-65 °C
Shiny, pearlescent PLA with a metallic or satin sheen. Prints beautifully but is weaker than normal PLA.
Nozzle 215-230 °CBed 55-65 °C
PLA with fine glitter particles that catch the light. Easy to print and fun to look at.
Nozzle 200-225 °CBed 55-65 °C
PLA with a speckled, stone-like look. Easy to print and good at hiding layer lines.
Nozzle 200-225 °CBed 55-65 °C
PLA blended with wood fibers for a warm, sandable, stainable look. Fussy to print.
Nozzle 190-215 °CBed 50-60 °C
PLA with glow pigment that charges in light and glows for hours. Great for fun, poor for strength.
Nozzle 200-220 °CBed 55-60 °C
PLA filled with chopped carbon fiber. Very stiff, matte, and low-warp, but brittle and hard on nozzles.
Nozzle 210-240 °CBed 50-65 °C
The tougher everyday choice. More heat- and impact-tolerant than PLA, and decent outdoors in the shade.
Nozzle 230-250 °CBed 70-85 °C
PETG tuned for high-speed printing. Same toughness, faster flow, fewer compromises at speed.
Nozzle 240-260 °CBed 70-85 °C
Unpigmented, translucent PETG. Good for light covers, windows, and parts you want to see through.
Nozzle 230-250 °CBed 70-80 °C
PETG filled with carbon fiber. Stiffer, with a matte finish and cleaner prints.
Nozzle 240-270 °CBed 65-80 °C
Tough, heat-resistant, and easy to sand and smooth. The classic choice for enclosures and hot parts.
Nozzle 230-260 °CBed 90-110 °C
ABS filled with carbon fiber. Stiffer and less warp-prone than plain ABS, with a dry matte look.
Nozzle 240-270 °CBed 90-110 °C
UV- and weather-resistant, tough, and heat-tolerant. The go-to for parts that live outside.
Nozzle 240-270 °CBed 90-110 °C
ASA filled with carbon fiber. Stiff, matte, and weatherproof, for rigid outdoor and automotive parts.
Nozzle 245-275 °CBed 90-110 °C
Flexible but firm. The easiest TPU to print and the usual choice for grips, cases, and bumpers.
Nozzle 210-235 °CBed 30-60 °C
A softer, more rubbery TPU. Squishy and stretchy, but much harder to print than 95A.
Nozzle 210-235 °CBed 30-60 °C
Nothing matches. Try removing a filter.